Power-Up Procedure

1. Unlock & Power On the System

• Locate the key on magnet beside main FOH rack (to the right of the locked door)
• Use the key to unlock the power rack.
• On the touch panel at the top of the power rack, turn on all power.

2. Start the Lighting System (Hog 4 PC)

Also, the correct breakers need to be turned on before launching the Hog software.

• Turn 3 Set of breakers in two different locations… First location is by the icemaker. Picture is at the bottom of this. It will be the first set of three and the third set of three. Pic at bottom

• Second set of breakers is in closet in rack room… There are four breakers labeled lighting.

• Third set is a small box to the left labeled LED

• Power on the PC running Hog software.

• If prompted for a passcode, enter: 19735 (Pattern: Bottom Right → Top Right → Top Left → Middle → Bottom Right)

• Ensure the lights are responsive before proceeding.

  • IMPORTANT: If the lights are stuck, check if they were turned off incorrectly during shutdown.

• Choose at the top of the column before pushing up the fader.

  • The faders are labeled: House, Color, etc.

• On the hog, press on the control surface, choose, play, and then push the fader to the top. Do that on the first two graders. The second fighter is the hazer.

3. Set Up Audio (Midas Pro6 Console)

• Load “muted scene” #49 (else it may roar)